Product ID:HEAT-SHRINKABLE POLYMERIC PRODUCTS
MSDS Date:04/01/1991
FSC:5970
NIIN:01-346-5117
MSDS Number: BQYPX

Emergency Phone: 415-361-4907

Info Phone: 415-361-4907

Preparer: DONNA SHEID

Cage: 06090

Telephone: 415-361-4907

Cage: 06090

POLYOLEFIN

OSHA PEL 5 MG/M3 AS OIL MIST

ACGIH TLV: 5 MG/M3 AS OIL MIST

POLYETHYLENE AS A COPOLYMER

Routes of Entry: Inhalation:NO Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:OVERHEATING THE PRODUCT MAY CAUSE
FUMES WHICH CAN IRRITATE EYES, SKIN, RESPIRATORY SYSTEM AND
POSSIBLY CAUSE ASPHYXIATION IN ENCLOSED AREAS.
Explanation of Carcinogenicity:NO INGREDIENT OF A CONCENTRATION OF 0.1%
OR GREATER IS LISTED AS A CARCINOGEN OR SUSPECTED CARCINOGEN BY
NTP, IARC, OSHA
Effects of Overexposure:INHALED: COUGHING, WHEEZING, SNEEZING,
SHORTNESS OF BREATH, HEADACHE, NAUSEA. EYES: REDNESS, DISCOMFORT.
SKIN: REDNESS, DISCOMFORT.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

First Aid:EYES: FLUSH WITH WATER FOR 15 MINUTES. GET IMMEDIATE MEDICAL
ATTENTION. INHALED: REMOVE TO FRESH AIR. SKIN: IF MOLTEN
ADHESIVE/MASTIC CONTACTS SKIN, COOL IMMEDIATELY WITH WATER. DO NOT
ATTEMPT TO REMO VE FROM SKIN- TREAT AS BURN AND GET IMMEDIATE
MEDICAL ATTENTION. INGESTED: SEEK MEDICAL ATTENTION. IS NOT A
NORMAL ROUTE OF EXPOSURE.

Flash Point:NONE
Extinguishing Media:MEDIA APPROPRIATE FOR SURROUNDING FIRE.
Fire Fighting Procedures:WEAR SELF-CONTAINED BREATHING APPARATUS AND
PROTECTIVE CLOTHING.
Unusual Fire/Explosion Hazard:NONE SPECIFIED BY MANUFACTURER.

Spill Release Procedures:SWEEP UP AND PLACE IN A CONTAINER FOR LATER
DISPOSAL.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling and Storage Precautions:NONE SPECIFIED BY MANUFACTURER.
Other Precautions:NONE SPECIFIED BY MANUFACTURER.

Respiratory Protection:IF INSTALLATION OCCURS IN A CONFINED OR
UNVENTILATED AREA, USE OF NIOSH/MSHA APPROVED RESPIRATOR IS
RECOMMENDED.
Ventilation:USE ADEQUATE MECHANICAL VENTILATION.
Protective Gloves:HEAT-RESISTANT DURING INSTALLATION
Eye Protection:SAFETY GLASSES
Other Protective Equipment:CLOTHING TO PREVENT HOT MATERIAL CONTACT
BODY DURING INSTALLATION
Work Hygienic Practices:WASH HANDS AFTER USE.
Supplemental Safety and Health

HCC:N1
Appearance and Odor:BLACK PLASTIC WITH INSIDE ADHESIVE-SEALANT COATED

Stability Indicator/Materials to Avoid:YES
NONE SPECIFIED BY MANUFACTURER.
Stability Condition to Avoid:OVERHEATING OF PRODUCT.
Hazardous Decomposition Products:CARBON MONOXIDE AND CARBON DIOXIDE,
ALDEHYDES, VARIOUS HYDROCARBON AND ORGANIC PRODUCTS.

Waste Disposal Methods:DISPOSE OF IN ACCORDANCE WITH LOCAL, STATE AND
FEDERAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.